Product information

Overview
PLEASE NOTE: this mod is sold without a battery!


The Centaurus M100 box, produced by LOST VAPE, is designed with a robust mix of stainless steel and aluminum alloy. Its specific dimensions allow it to accommodate the majority of atomizers on the market, with a 510 connection suitable for models up to 26mm in diameter.

This model stands out with its elegantly engraved front panel, interchangeable for enhanced customization of the device.

The Centaurus M100 is powered by a 18650 battery, sold separately. Although a USB Type-C cable is included for charging, it is recommended to use an external charger for better battery longevity. A system of colored indicators informs about the battery charge status.

In terms of performance, the box reaches a maximum power of 100W, thanks to its Quest 2.0 chipset. It offers two operating modes: an adjustable VW mode from 5 to 100W and a DIY mode, adjustable via a dial located near the main button.

Finally, a 0.96-inch color OLED screen displays key information about vaping, such as battery level, selected power, resistance value, as well as the amount and duration of puffs, thus providing an informative and enjoyable vaping experience.

Tech Specs
Manufacturing country
RPC
Diameter
26 mm
Power
100
Battery type
1 x Accus 18650 (not included)
What’s in the Box
Content
Mod Centaurus M100
Câble USB-C
Carte de garantie
Manuel d'utilisation
Advice & Precautions

Using a box mod for an electronic cigarette requires advice and precautions to ensure safety and user satisfaction. Here are some of the essential tips and precautions:

  • Read the user manual: Familiarize yourself with the operation of your box mod by reading the manual provided by the manufacturer.
  • Select quality batteries: Only use batteries specially designed for electronic cigarettes and from trusted sources. Make sure they are in good condition.
  • Use an appropriate charger: Do not recharge your batteries with unsuitable chargers. Always use a charger designed for electronic cigarettes.
  • Turn off the box mod when you are not using it: To avoid any risk of fire or overheating, turn off your device when you are not using it.
  • Check wires and connectors: Make sure wires and connectors are not damaged or in contact with metal objects that could short circuit the device.
  • Avoid overloading: Do not leave your box mod plugged in for too long. Follow the charging times recommended by the manufacturer.
  • Keep your batteries safe: Avoid storing extra batteries in your pocket or bag without protection. Use storage cases.
  • Avoid extreme temperatures: Excessively hot or cold temperatures can damage batteries. Avoid leaving your electronic cigarette in direct sunlight or in a very cold environment.
  • Check the resistance of your coils: Make sure that the resistance of your coils is compatible with the power output of your box mod. Use coils specifically designed for your device.
  • Do not leave your device unattended: Avoid leaving your electronic cigarette unattended, especially if it is lit.
  • Respect local laws: Consider local vaping regulations. Some areas may prohibit the use of electronic cigarettes.
  • Avoid vaping in fire sensitive areas: Avoid vaping in areas where smoking is prohibited, as this can be considered a potential source of fire.

By following these tips and taking these precautions, you can use your box mod safely and enjoy a satisfying vaping experience. Be sure to always consult the specific user manual for your device, as recommendations may vary from model to model.

Products reviews

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)