Search

Recherches rapides

Presentation

The ELFBAR Puff NIO30K 20mg kit is a rechargeable prefilled pod system designed for simple use, a large e-liquid capacity, and up to 30,000 puffs advertised with the full kit. Its built-in 1000mAh battery recharges via USB-C, while its two prefilled pods provide approximately 24ml of e-liquid in total.

Each set combines a 2ml reservoir with a 10ml reservoir and 50/50 PG/VG e-liquid with 20mg/ml nicotine salts. The NIO30K also offers two operating modes, BASE and TURBO, an integrated Mesh coil, and automatic inhalation activation for MTL vaping without complicated settings.


💨 Up to 30,000 puffs advertised

ELFBAR presents the NIO30K as a system capable of delivering up to approximately 30,000 puffs with the two included pods.

This estimate applies to all the e-liquid in the box and depends heavily on:

  • BASE or TURBO mode used
  • Duration of each inhalation
  • Frequency of use
  • Inhalation intensity

The puff count is therefore a manufacturer's indicative estimate, not a guaranteed battery life.

The TURBO mode notably increases the instantaneous power, resulting in faster e-liquid and battery consumption.


💧 24ml of e-liquid in total

The NIO30K kit includes two prefilled sets.

Each set combines:

  • A 2ml reservoir containing the Mesh coil
  • An additional 10ml reservoir

This provides up to 12ml per set, or approximately 24ml of e-liquid in total in the box.

This design meets the requirements for the nicotine reservoir format while providing a significantly larger liquid capacity than a conventional prefilled pod.


🧪 20mg/ml nicotine salts

NIO30K pods contain e-liquid with nicotine salts at 20mg/ml, or 2%.

This is the maximum permitted nicotine concentration for e-liquids sold under European regulations.

Nicotine salts are primarily used in MTL devices operating at moderate power.

The NIO30K is therefore intended for adult vapers who already use nicotine. If you don't smoke, don't vape.


⚖️ 50/50 PG/VG ratio

The e-liquid used by the NIO30K has a balanced 50/50 PG/VG ratio.

This composition promotes:

  • Good e-liquid supply to the coil
  • Consistent vaporization
  • A balance between sensation and vapor
  • Use suited to an MTL draw

The liquid is supplied directly in the cartridges, so no preparation is needed.


🔋 Rechargeable 1000mAh battery

Unlike a traditional disposable vape, the ELFBAR NIO30K has a built-in rechargeable 1000mAh battery.

The same battery can therefore be recharged several times while using the supplied e-liquid.

This capacity makes it possible to keep the device relatively compact while providing enough power to run the Mesh coil every day.


🔌 USB-C charging

The NIO30K recharges via a USB Type-C port.

When the battery runs low:

  • Connect the device to a compatible USB-C cable
  • Let the battery recharge
  • Unplug the device once charging is complete

The USB-C cable is not included with the product currently sold in France.


⚡ Two modes: BASE and TURBO

The ELFBAR NIO30K offers two operating levels that let you change the experience.

BASE mode

BASE mode prioritizes:

  • More moderate consumption
  • Balanced vapor
  • Better overall battery life
  • Use tailored to the estimated maximum number of puffs

TURBO mode

TURBO mode increases the power output, up to approximately 30W maximum according to currently published specifications.

It prioritizes:

  • More intense vapor
  • More dynamic heating
  • More pronounced sensations

In return, this mode uses more battery power and e-liquid.


🔥 Integrated Mesh coil

The NIO30K uses a Mesh coil directly integrated into its cartridge.

Mesh technology increases the heating surface in contact with the cotton and notably enables:

  • Fast heat-up
  • Even vaporization
  • Consistent flavor delivery
  • Vapor production suited to MTL

No separate coil needs to be installed or replaced.


🛠️ No need to change the coil

The system is designed to minimize handling as much as possible.

You do not need to:

  • Manually fill a clearomizer
  • Install a coil
  • Prime a separate coil
  • Precisely adjust a power level

The coil is already built into the cartridge, and the e-liquid comes prefilled.

When the whole unit is empty or the flavor becomes insufficient, replace the complete cartridge with a compatible consumable.


💨 Automatic MTL draw

The ELFBAR NIO30K is primarily designed for indirect MTL inhalation.

The vapor is first drawn into the mouth before being inhaled, with a tighter draw than a DTL e-cigarette.

This operation is particularly suitable for:

  • For nicotine salts
  • For users seeking a tight draw
  • For moderate vapor production
  • For vapers who appreciate simple operation

💨 Automatic activation on inhale

There’s no Fire button needed to activate the NIO30K.

Simply place the mouthpiece to your lips and inhale to automatically activate the coil.

This system makes it particularly easy to use and avoids complicated adjustments.


🌀 Fixed airflow

The NIO30K has an air inlet located at the bottom of the device.

L’airflow is not adjustable.

The draw is therefore optimized for the MTL operation intended by ELFBAR.

There’s no need to adjust an airflow ring or slider before use.


📊 LED screen to monitor operation

The NIO30K features a small LED display that lets you quickly check the device’s status.

It lets you monitor, in particular:

  • The remaining battery level
  • The mode in use
  • The main operating information

The transparent body also lets you see the e-liquid levels directly.


👀 Transparent design for monitoring the liquid

The NIO30K’s design deliberately highlights its cartridges and internal reservoirs.

This transparent design makes it possible to:

  • Easily monitor the remaining e-liquid
  • Anticipate when to change the cartridge
  • Give the kit a distinctive visual identity

The body is mainly made of polycarbonate, while the tank components use transparent PCTG.


📏 A compact design despite its large capacity

The ELFBAR NIO30K measures approximately:

  • 93mm tall
  • 53mm wide
  • 26.5mm thick

It weighs approximately 50g.

This format accommodates the 1000mAh battery and e-liquid reserves while keeping a compact feel in the hand.


🍒 Ice Cherry

Ice Cherry combines cherry flavor with a fresh finish.

A fruity, icy version for fans of red fruits, with a refreshing sensation on the exhale.


🍓 Ice Strawberry

Ice Strawberry offers fruity strawberry with a fresh note.

A simple, recognizable flavor for fans of fresh fruit recipes.


🍑 Peach Ice

Peach Ice combines fruity peach with a refreshing sensation.

A sweet, fresh recipe for fans of summery flavors.


🫐 Tart Blueberry Raspberry

Tart Blueberry Raspberry combines blueberry and raspberry notes with a tangier profile.

A recipe for fans of bolder red fruit blends.


🍎 Double Apple

Double Apple combines different apple profiles for a fruity flavor balanced between sweetness and character.

A flavor particularly suited to fans of classic apple recipes.


🍓 Red Fruits

Red Fruits combines several red fruit notes for a more complex flavor than a single-fruit flavor.

This version rounds out the NIO30K range with a versatile fruity profile.


🔄 How to use the ELFBAR NIO30K?

L’use has been designed to be particularly simple:

  • Prepare and install the prefilled pod correctly
  • Check that the battery has sufficient charge
  • Select BASE or TURBO mode depending on your preferred experience
  • Inhale directly through the mouthpiece to activate the vape
  • Recharge the battery via USB-C when needed

No manual e-liquid refilling is required.


⚠️ 30,000 puffs: an indicative figure

The NIO30K label refers to a stated capacity of up to approximately 30,000 puffs under the conditions specified by the manufacturer.

This is not a guaranteed number.

Long puffs, intensive use, or TURBO mode can significantly reduce the actual number of puffs obtained.


♻️ A rechargeable battery instead of a classic disposable puff

The NIO30K's built-in battery can be recharged multiple times via USB-C.

This design lets you keep the electronic module while using the cartridges, rather than discarding a battery after a single charge.

When the battery reaches the end of its service life, the device must be taken to an appropriate collection point for electrical and electronic equipment.


📦 ELFBAR NIO30K kit contents

The kit includes:

  • 1 ELFBAR NIO30K – 1000mAh battery
  • 2 sets of prefilled cartridges NIO30K 2ml + 10ml reservoir
  • E-liquid with 20mg/ml nicotine salts
  • 1 user manual

Both included cartridges are the same flavor as the selected variant.

The USB-C cable is not included.


🎯 Who is the ELFBAR NIO30K for?

The ELFBAR NIO30K is intended for adult vapers looking for a nicotine device that is easy to use and has a large e-liquid supply.

It is particularly suitable for:

  • Users of nicotine salts
  • Fans of MTL vaping
  • Vapers looking for a system that requires no manual refilling
  • Users who do not want to change the coil
  • People looking for a rechargeable battery
  • Users who enjoy fruity and fresh flavors

🔞 Nicotine: product for adults only

This product contains nicotine at 20mg/ml, a highly addictive substance.

Sale to minors is prohibited.

Vaping is intended for adult smokers seeking an alternative to smoking tobacco. If you do not smoke, do not vape.


⭐ ELFBAR NIO30K – 1000mAh, 20mg and up to 30,000 puffs

The ELFBAR NIO30K combines a 1000mAh rechargeable battery, two prefilled assemblies containing up to approximately 24ml of e-liquid, and nicotine salts at 20mg/ml.

Its BASE and TURBO modes, built-in mesh coil, LED screen and automatic activation make it easy to enjoy an MTL vape without technical adjustments or coil changes.

With a stated capacity of up to approximately 30,000 puffs, depending on usage conditions, the NIO30K is designed for users who prioritize simplicity, a large e-liquid supply and a rechargeable battery in a compact format.

Features

Brand

ELFBAR

Manufacturing country
RPC
Dimensions
93 x 26.5 x 53mm
Battery type
Intégrée (1000 mAh)
Type of inhalation
MTL
Box contents

Batterie NIO30K de ELFBAR (1000 mAh)
Cartouche préremplie 10ml d'eliquide x 2

Advice & Precautions

Using an e-cigarette kit with a clearomizer also involves following advice and precautions to ensure safety and proper operation. Here are some tips and precautions to keep in mind:

  • Read the user manual: Make sure you understand how your kit works by reading the manual provided by the manufacturer.
  • Choose quality e-liquids: Use e-liquids specifically designed for e-cigarettes and made by reputable brands.
  • Filling the clearomizer: Fill the clearomizer according to the manufacturer's instructions, avoiding overfilling. Make sure not to pour liquid into the central tube.
  • Check the coil resistance: Make sure the coil resistance is compatible with your kit's output power. Replace the coil if it is worn.
  • Prime the coil: Before first use or when replacing the coil, prime it by applying a few drops of liquid directly to the coil.
  • Adjust the power: Set your kit's output power according to the coil resistance and your personal preferences.
  • Avoid leaks: Make sure the clearomizer is assembled correctly to prevent leaks. Keep the clearomizer upright when not in use.
  • Check the battery: Make sure your kit's battery is in good working order. If the battery shows signs of damage, replace it.
  • Store your e-liquids safely: Store your e-liquids in a cool, dry place out of the reach of children and animals.
  • Clean regularly: Clean the clearomizer and its components regularly to prevent the buildup of liquid residue.
  • Avoid vaping in fire-sensitive areas: As with a box mod, avoid vaping in places where smoking is prohibited, as it may be considered a potential source of fire.
  • Comply with local laws: Follow local vaping regulations. Some areas may prohibit the use of e-cigarettes.
  • Keep spare parts: It may be useful to have spare coils, seals, and additional components on hand.

By following these tips and precautions, you can use your e-cigarette kit with a clearomizer safely and enjoy a pleasant vaping experience. Always consult the user manual specific to your kit, as recommendations may vary depending on the model.