HELLVAPE Dead Rabbit Pro RDA - Rebuildable Atomizer 24mm

The Dead Rabbit Pro RDA by HELLVAPE is a 24mm rebuildable atomizer specially designed for dual-coil builds. Its spacious postless deck, three airflow configurations, and Bottom Feeder compatibility make it a versatile dripper for experienced vapers seeking an airy vape, high vapor production, and precise airflow adjustment.

The Dead Rabbit Pro stands out with its dual air inlet system, which lets you choose between bottom airflow, side airflow or bottom + side airflow. HELLVAPE also includes a BF pin, two 0.37Ω Ni80 Clapton coils, two cotton wicks, a cutting tool, and an extra 810 drip tip and airflow ring for customizing the atomizer.

🐰 A Dead Rabbit designed for dual-coil builds

The Dead Rabbit Pro retains the DNA of the famous Dead Rabbit family in a modern design developed specifically for dual-coil builds.

HELLVAPE replaces the traditional Rabbit Ear deck from the first generations with a postless deck offering plenty of building space.

This configuration notably allows you to:

• To install two side-by-side coils
• To position the coils precisely
• To make effective use of the dual airflow
• To achieve a large heating surface
• To prioritize a generous DTL vape

The Dead Rabbit Pro is therefore primarily intended for users looking to get the most out of a dual-coil build, rather than for low-wattage MTL use.

📏 24mm diameter and compact design

The Dead Rabbit Pro has a diameter of 24mm and a height of approximately 31.3mm.

It weighs approximately 32g, keeping the setup relatively compact despite the dual-coil deck and dual airflow system.

Its 24mm diameter ensures a seamless fit on many compatible electronic box mods and mods with a 510 connection.

Its main dimensions are therefore:

• Diameter: 24mm
• Height: approximately 31.3mm
• Weight: approximately 32g

🛠️ Postless dual-coil deck

The Dead Rabbit Pro features a postless deck with four slots for directly inserting the legs of the two coils.

This design frees up space in the center of the deck and makes it easier to position the coils in front of the air inlets.

To build the setup:

• Prepare two identical coils
• Trim their legs to the appropriate length
• Insert the coils into the deck slots
• Tighten the mounting screws
• Center the coils above the air inlets
• Check their final resistance
• Heat gradually to ensure the coils heat evenly
• Install and then saturate the cotton

HELLVAPE includes a coil leg cutting tool to make preparing the coils easier before installation.

🌬️ 3 airflow configurations

The Dead Rabbit Pro’s main distinguishing feature is its adjustable dual airflow system.

L’the atomizer lets you choose between three configurations:

• Bottom Airflow
• Side Airflow
• Bottom + Side Airflow

These three options let you significantly change how the atomizer performs without changing the build.

L’the user can choose to prioritize flavor, increase the amount of air, or combine both air intakes for a particularly airy vape.

⬆️ Side airflow for an airier vape

Side airflow directs air laterally toward the coils.

This top airflow is particularly useful for:

• To increase airflow
• To cool both coils effectively
• To achieve a more airy DTL draw
• To support builds operating at high wattages

The ring lets you gradually reduce the opening to precisely adjust the amount of air admitted.

⬇️ Bottom airflow directed beneath the coils

Bottom airflow sends air directly beneath the coils, where it then rises toward the mouthpiece.

This setup is especially popular on flavor-focused rebuildable atomizers, as it lets the airflow pass efficiently through the heating area.

It is particularly suited to:

• Dense vapor
• Focused flavor delivery
• A steady supply of fresh air to both coils
• A more direct draw toward the coils

🌪️ Bottom + Side Airflow for maximum airflow

The third setting lets you use the bottom and side air intakes simultaneously.

This setup provides the Dead Rabbit Pro’s highest airflow and works particularly well with dual-coil builds designed to produce lots of vapor.

It allows you to achieve:

• A particularly airy DTL draw
• Enhanced coil cooling
• High vapor production
• A vape suited to high wattages

The ability to combine both airflows is one of the major differences between the Dead Rabbit Pro and many more traditional RDAs.

🎯 Airflow precisely directed at the coils

HELLVAPE designed the airflow system to concentrate the air around the two coils installed on the deck.

Bottom airflow directs air at the coils from underneath, while side airflow feeds them from the sides.

This combination allows for precise adjustment:

• Vapor volume
• Vaping temperature
• Draw restriction
• Flavor reproduction

Coil positioning also plays an important role: a coil correctly centered in relation to the airflow inlets will allow the atomizer’s full potential to be realized.

💧 Traditional dripping use

The Dead Rabbit Pro is first and foremost an RDA, or Rebuildable Dripping Atomizer.

It has no traditional tank: e-liquid is added directly to the coils and cotton.

This design offers several advantages:

• A particularly short vapor path
• Immediate access to the build
• Quick e-liquid changes
• Excellent responsiveness
• No large tank

Simply remove the top cap or pour a few drops of e-liquid in from the top before vaping again.

💦 Bottom Feeder compatible thanks to the BF pin

The kit includes a Bottom Feeder pin that allows the Dead Rabbit Pro to be used with a compatible squonk box.

Once the BF pin is installed, the e-liquid in the box’s internal bottle can rise directly to the deck when the user squeezes the bottle.

This configuration combines:

• The performance of a dripper
• An e-liquid reservoir built into the box
• Cotton fed from below
• A greatly reduced need for dripping

The Dead Rabbit Pro can therefore be used either as a classic RDA or in a squonk / Bottom Feeder configuration.

🔗 510 connection

The Dead Rabbit Pro uses a standard 510 connection.

It can therefore be installed on many compatible electronic boxes or mods, provided they have a sufficiently wide platform to accommodate its 24mm diameter.

When using a rebuildable atomizer, it is essential to check:

• The final build resistance
• The selected power
• The box’s capabilities
• The discharge limits of the battery used

👄 810 drip tip

The Dead Rabbit Pro is equipped with an 810-format drip tip.

This relatively large diameter naturally suits the atomizer’s DTL orientation and allows a large volume of vapor to pass through.

HELLVAPE also includes a second colored 810 drip tip to customize the RDA’s appearance.

L’s can easily change the style of the Dead Rabbit Pro without replacing the entire atomizer.

🎨 Additional airflow ring included

HELLVAPE also enhances visual customization with an additional side airflow ring in a different finish.

This part can be paired with the included colored drip tip to quickly change the atomizer’s appearance.

This makes it possible to create several color combinations with the same Dead Rabbit Pro.

🔥 2 Ni80 Clapton 0.37Ω coils included

The kit contains 2 pre-made 0.37Ω Ni80 Clapton coils.

These coils let you build the dual-coil setup intended for the deck.

Ni80, or Nichrome 80, is commonly used in rebuildable atomizers because it heats up quickly.

The Clapton structure also provides a large heating surface, promoting:

• Generous vapor production
• Good e-liquid vaporization
• A rich flavor

The final value of the dual-coil build will be less than 0.37Ω when two identical coils are connected in parallel. It must be measured before use.

🧵 2 Shoelace cotton wicks

HELLVAPE also provides 2 Shoelace cotton wicks.

Their stiff ends make it easier to pass the cotton through the pre-made coils.

Once installed:

• Pass the cotton through the center of each coil
• Adjust the length of the ends
• Position the wicks in the well
• Thoroughly saturate the cotton
• Make sure the e-liquid supply remains unobstructed

Getting the cotton amount right is particularly important to prevent insufficient wicking or, conversely, excessive packing in the well.

🛠️ Coil cutting tool included

With a postless deck, the coil legs must be cut before inserting them into the deck.

HELLVAPE therefore provides a cutting guide to make it easier to get the same length on both coils.

This small accessory makes it easier to:

• Preparing the build
• L coil alignment
• The symmetrical positioning of the two coils
• Faster installation on the deck

🌿 Which e-liquid should you use with the Dead Rabbit Pro?

The Dead Rabbit Pro is primarily designed for DTL vaping with two coils and high vapor production.

It can therefore be used with e-liquids that are relatively high in VG.

Ratios around:

• 40/60 PG/VG
• 30/70 PG/VG
• Higher-VG formulations depending on the build

are particularly well suited to this type of dripper.

With high vapor production, a low nicotine level is generally preferred.

The final choice should, however, remain suited to the resulting resistance, the power used, and the user’s habits.

⚠️ A rebuildable atomizer for experienced users

The Dead Rabbit Pro is a rebuildable atomizer and requires more knowledge than a clearomizer using pre-made coils.

Its use requires you to know how to:

• Building the coils
• Calculating and measuring the resistance in ohms
• Breaking in the coils
• Installing the cotton
• Choosing an appropriate power level
• The batteries' electrical limits

The build must be checked before use to rule out any short circuits or a resistance value incompatible with the equipment being used.

This precaution is even more important when using a mechanical mod or mechanical Bottom Feeder.

🎨 7 main colors

HELLVAPE offers the Dead Rabbit Pro RDA in several finishes:

• Stainless Steel
• Blue
• Gold
• Matte Black
• Gunmetal
• Rainbow
• Red

The additional drip tip and airflow ring included in the package let you add a second color combination.

📦 Dead Rabbit Pro RDA contents

The official package includes:

• 1 HELLVAPE Dead Rabbit Pro RDA – 24mm atomizer
• 1 additional 810 drip tip
• 1 additional side airflow ring
• 2 0.37Ω Ni80 Clapton coils
• 2 Shoelace cotton wicks
• 1 Bottom Feeder pin
• 1 coil-cutting tool
• 1 bag of accessories and spare parts
• 1 user manual

🎯 Who is the HELLVAPE Dead Rabbit Pro RDA for?

The Dead Rabbit Pro RDA – HELLVAPE is designed for experienced vapers looking for a high-performance, highly versatile dual-coil dripper.

It's particularly suited to:

• For dual-coil build enthusiasts
• For users looking for a DTL vape
• For vapers who enjoy producing a lot of vapor
• For Bottom Feeder box users
• For dripper enthusiasts
• For vapers who want precise airflow adjustment
• For users looking for a spacious postless deck
• For rebuildable enthusiasts who want to customize their builds

Its three airflow configurations let you tailor the RDA’s performance to different coils and power levels.

⭐ HELLVAPE Dead Rabbit Pro RDA – dual coil and triple airflow

With its 24mm diameter, postless dual-coil deck, and three configurations (Bottom / Side / Bottom + Side Airflow), the Dead Rabbit Pro offers a particularly versatile approach to rebuildable dripping.

The included BF pin makes it easy to switch from conventional dripping to a squonk setup, while the two 0.37Ω Ni80 Clapton coils and included cotton let you build your first setup right away.

Compact, fully adjustable, and supplied with numerous accessories, the HELLVAPE Dead Rabbit Pro RDA is a complete rebuildable atomizer for dual-coil enthusiasts seeking vapor, customization, and precise airflow.