Pods Oxva VPrime 5ml/6ml - Pack de 2

The OXVA VPRIME PODS are replacement refillable cartridges designed for the VPRIME and VPRIME 2 kits. Sold in a 2-pack, they let you choose between the classic VPRIME cartridges with a capacity of 5 ml and UNITECH 2.0 technology and the new 6 ml VPRIME Dual Mesh cartridges with UNITECH 3.0 technology.

The range therefore covers a wide variety of vaping styles, from a tighter MTL draw to powerful DTL. The classic cartridges are available in 0.2Ω, 0.4Ω, 0.6Ω and 0.8Ω, while the new Dual Mesh UNITECH 3.0 versions are available in 0.4Ω and 0.6Ω.

All of them have an integrated coil, so no separate coil is required.

🖋️ Two generations of VPRIME cartridges

OXVA now offers two generations of pods for the VPRIME platform.

Classic VPRIME – UNITECH 2.0

The original cartridges have a capacity of 5 ml and use an integrated Single Mesh coil.

They are available in:

• 0.2Ω
• 0.4Ω
• 0.6Ω
• 0.8Ω

They feature UNITECH 2.0 technology, developed to provide even heating, good durability and excellent flavour reproduction.

VPRIME Dual Mesh – UNITECH 3.0

The new generation offers a higher capacity of 6 ml and a Dual Mesh structure.

It is available in:

• 0.4Ω Dual Mesh
• 0.6Ω Dual Mesh

These new cartridges use UNITECH 3.0 technology and are specifically designed to take advantage of the VPRIME 2's BOOST and ECO modes.

💧 Classic VPRIME: 5 ml tank

VPRIME UNITECH 2.0 cartridges have a generous 5 ml tank.

This capacity helps limit frequent refills, particularly with the 0.2Ω and 0.4Ω coils used at higher power.

The cartridges are supplied empty, without e-liquid or nicotine.

Filling is done from the top using the Top Fill system, allowing for quick and clean refills.

💦 Simple and convenient Top Fill

The top-filling system makes everyday use easier.

It provides, in particular:

• Quick access to the tank
• Fewer steps
• Clean refilling
• Good visibility of the e-liquid level
• Refilling without completely removing the cartridge, depending on the device

🔥 UNITECH 2.0: the classic VPRIME cartridges

First-generation VPRIME pods use UNITECH 2.0 technology.

OXVA combines this technology with a five-layer anti-leak structure designed to better control e-liquid and condensation.

It provides, in particular:

• Good flavour reproduction
• Dense vapour
• Even heating
• Improved flavour stability
• Good durability
• Reduced spitback

The four available resistances cover a wide range of uses.

0.2Ω: powerful DTL

The 0.2-ohm version operates at around 45 to 60W.

It is intended for DTL vapers looking for:

• Very dense vapour
• A wide-open draw
• Powerful heating
• A dynamic sub-ohm experience

0.4Ω: RDL / DTL

The 0.4-ohm version operates at around 28 to 38W.

It offers an excellent balance between power, vapour and flavour reproduction.

0.6Ω: RDL / restricted MTL

The 0.6-ohm version operates at around 20 to 25W.

It delivers a more restricted vape with lower consumption and excellent battery life.

0.8Ω: MTL

The 0.8-ohm version operates at around 12 to 18W.

It is particularly suited to an MTL draw, with more discreet vapour and low e-liquid consumption.

🆕 VPRIME Dual Mesh: new UNITECH 3.0 generation

With the VPRIME 2, OXVA introduces a new generation of VPRIME Dual Mesh cartridges.

Unlike the classic 5 ml pods, these new cartridges offer a capacity of 6 ml.

They use two Mesh structures combined with UNITECH 3.0 technology, allowing the device to use different heating modes depending on the vape device being used.

This new architecture is designed in particular to improve:

• Heating consistency
• Vapour density
• Flavour reproduction
• Condensation management
• Leak protection
• Pod responsiveness

OXVA also announces improved leak protection compared with the previous generation.

⚡ Dual Mesh 0.4Ω: power and DTL

The new VPRIME Dual Mesh 0.4-ohm cartridge is designed for vapers looking for a powerful vape.

Paired with the VPRIME 2, it lets you take full advantage of BOOST and ECO modes.

BOOST mode makes greater use of the Dual Mesh structure to provide:

• More intense heating
• Denser vapour
• A DTL draw
• More pronounced flavours

Depending on the setting, this version can be used with the VPRIME 2 at up to its maximum power of 60W.

🌀 Dual Mesh 0.6Ω: versatile RDL

The VPRIME Dual Mesh 0.6-ohm cartridge delivers a more moderate and versatile vape.

It maintains excellent flavour reproduction while reducing consumption compared with the 0.4Ω version.

It is an excellent choice for:

• RDL vaping
• Intermediate power
• Good battery life
• Generous vapour
• An excellent balance between flavour and consumption

♻️ BOOST and ECO modes with the VPRIME 2

The new Dual Mesh cartridges allow the VPRIME 2 to use both operating modes.

BOOST

BOOST mode prioritises power and intensity.

It makes full use of the Dual Mesh structure to produce denser vapour and a more dynamic vape.

ECO

ECO mode prioritises battery life.

It reduces energy and e-liquid consumption while maintaining good flavour reproduction.

Classic VPRIME cartridges also work with the VPRIME 2, but they then use ECO mode and do not offer all the capabilities of Dual Mesh.

🔄 VPRIME and VPRIME 2 compatibility

Both generations of cartridges are compatible with:

• OXVA VPRIME
• OXVA VPRIME 2

Compatibility works in both directions.

On the first-generation VPRIME

• Classic VPRIME UNITECH 2.0: normal operation
• VPRIME Dual Mesh UNITECH 3.0: compatible, operates in BOOST mode

On the VPRIME 2

• Classic VPRIME UNITECH 2.0: compatible, ECO mode
• VPRIME Dual Mesh UNITECH 3.0: BOOST and ECO modes

This compatibility allows first-generation VPRIME users to access the new Dual Mesh cartridges without immediately changing devices.

🛡️ UNITECH 3.0 and enhanced leak protection

UNITECH 3.0 technology features a redesigned internal architecture.

OXVA notably uses a larger condensation collection chamber to better retain excess liquid.

This development is designed to provide:

• Cleaner use
• Less condensation
• Consistent cotton wicking
• Improved leak resistance
• A more even vape

It is one of the main improvements of the new VPRIME Dual Mesh cartridges.

🌿 Freebase or nicotine salts

VPRIME cartridges are compatible with different types of e-liquids.

For lower resistances such as 0.2Ω and 0.4Ω, generally choose low-nicotine traditional e-liquids suited to sub-ohm vaping.

The 0.6Ω and 0.8Ω versions are better suited to balanced liquids and can also be used with nicotine salts, depending on the strength.

The new 0.4Ω and 0.6Ω Dual Mesh cartridges are announced as compatible with Freebase and Nic Salt e-liquids, naturally adjusting the strength to the power being used.

💡 Priming a new cartridge

When using it for the first time:

• Fill the cartridge
• Carefully close the opening
• Wait a few minutes
• Install the pod on your VPRIME
• Start at moderate power
• Increase gradually if necessary

With UNITECH 3.0, OXVA announces particularly fast priming thanks to an enlarged wicking area.

Proper priming nevertheless helps preserve the coil and prevent a burnt taste during the first puffs.

🎯 Which VPRIME cartridge should you choose?

Choose the VPRIME 0.2Ω UNITECH 2.0 for powerful DTL vaping at up to 60W.

The 0.4Ω UNITECH 2.0 is suitable for balanced RDL / DTL vaping.

The 0.6Ω UNITECH 2.0 is ideal for a more restricted RDL vape.

The 0.8Ω UNITECH 2.0 prioritises MTL and reduced consumption.

Choose the new Dual Mesh 0.4Ω UNITECH 3.0 if you are looking for the VPRIME 2's maximum performance with BOOST and ECO modes.

Finally, the Dual Mesh 0.6Ω UNITECH 3.0 offers the best next-generation balance between vapour, flavour and battery life.

⭐ OXVA VPRIME – UNITECH 2.0 or Dual Mesh UNITECH 3.0

The OXVA VPRIME POD range now lets you choose between two generations of cartridges.

The classic 5 ml UNITECH 2.0 models offer four resistances from 0.2 to 0.8 ohm, covering vaping styles from DTL to MTL.

The new 6 ml Dual Mesh UNITECH 3.0 versions in 0.4 and 0.6 ohm provide more advanced heating and let you take full advantage of the VPRIME 2's BOOST and ECO modes.

All sold in packs of 2, they offer a versatile and upgradeable solution for users of the OXVA VPRIME and VPRIME 2.