Pods Vaporesso Vibe Dual Mesh 4.5ml - Pack de 3

The VAPORESSO VIBE DUAL MESH 4.5ML PODS are next-generation refillable pods designed for VIBE range electronic cigarettes. Sold in a pack of 3, they feature Dual Mesh technology, providing two different vaping experiences with a single pod.

Available in 0.6/0.8Ω or 0.7/1.0Ω, they automatically adapt to the compatible device’s ECO and PWR modes. This allows you to switch from a smooth, economical MTL vape to a more open draw with more vapour, without changing pods.

🖋️ Official VAPORESSO Dual Mesh cartridges

The VIBE CARTRIDGES use a Dual Mesh architecture composed of two independent heating structures.

Depending on the mode selected on the device, the pod adapts its operation to prioritise either battery life or power.

This technology provides:

• Even heating
• Excellent responsiveness
• Consistent flavours
• Denser vapour in PWR mode
• Greater versatility with a single pod

The coil is directly integrated into the pod, so no separate coil is required.

💧 Large 4.5 ml capacity

Each VIBE POD offers a capacity of 4.5 ml, helping to reduce the need for frequent refills.

This capacity is particularly convenient for everyday use, especially with PWR mode, which produces more vapour.

The pods are sold:

• Empty
• E-liquid-free
• Nicotine-free
• With integrated Dual Mesh coil
• Pack of 3

💦 Convenient side filling

The pod is filled from the side through an opening protected by a silicone membrane.

Simply remove the pod from the battery, open the tab and add your e-liquid.

This system provides:

• Easy filling
• Excellent leak resistance
• Quick handling
• Long battery life thanks to the 4.5 ml capacity
• Use without changing the coil

🔥 Dual Mesh: ECO or PWR with a single pod

The VIBE Dual Mesh system is based on two operating levels.

ECO mode

ECO mode provides gentler heating to reduce battery and e-liquid consumption.

It provides:

• A smoother vape
• A draw more geared towards MTL
• Better battery life
• Reduced consumption
• Optimised pod lifespan

PWR mode

PWR mode increases the heating intensity to produce more vapour.

It favours:

• A more dynamic vape
• Higher vapour production
• More intense flavours
• A more open draw
• An experience closer to RDL

⚡ 0.6 / 0.8Ω: up to 28W

The 0.6 / 0.8 ohm Dual Mesh pod is the more powerful of the two versions.

On compatible recent devices:

• ECO mode: 0.8Ω – 15W
• PWR mode: 0.6Ω – 28W

It is particularly suitable for users looking for an open MTL to light RDL draw.

ECO mode provides a smoother vape, while PWR mode significantly increases vapour density and flavour intensity.

🌬️ 0.7 / 1.0Ω: versatile MTL

The 0.7 / 1.0 ohm Dual Mesh pod favours a more restrictive and economical vape.

It operates at:

• ECO mode: 1.0Ω – 12W
• PWR mode: 0.7Ω – 20W

This version offers an excellent balance between:

• MTL draw
• Flavour
• Battery life
• E-liquid consumption
• Moderate vapour production

It is particularly suitable for former smokers and users looking for a draw closer to that of a traditional cigarette.

⚙️ VIBE Dual Mesh pod chart

0.6 / 0.8Ω

• ECO: 0.8Ω – 15W
• PWR: 0.6Ω – 28W
• Vape: open MTL / RDL

0.7 / 1.0Ω

• ECO: 1.0Ω – 12W
• PWR: 0.7Ω – 20W
• Vape: MTL / open MTL

This design allows you to change the pod's performance simply by changing the mode on the compatible battery.

🔄 Compatible with the VIBE range

The VIBE DUAL MESH SMART PODS are designed for compatible electronic cigarettes in the VAPORESSO VIBE range.

They can notably be used with several models, such as:

• VIBE
• VIBE SE
• VIBE NANO
• VIBE SE 2

The actual power delivered depends on the model used and the modes it offers.

Recent devices such as the VIBE SE 2 can notably run the 0.6/0.8Ω version at up to 28W.

🌿 Which e-liquids should you use?

VIBE pods are particularly suitable for smooth or balanced e-liquids.

A ratio of around 50/50 PG/VG is generally an excellent choice.

Depending on the resistance and strength, they can be used with:

• Classic e-liquids
• Nicotine salts
• Fruit flavors
• Fresh recipes
• Classics
• Smooth dessert flavors

For high nicotine strengths, ECO mode and MTL use are generally recommended.

💡 Priming a new pod

During first use:

• Fill the pod
• Carefully close the tab
• Wait a few minutes
• Install the pod on your VIBE battery
• Ideally, start in ECO mode
• Then switch to PWR if you want more vapor

This step allows the cotton to saturate properly and helps preserve the coil.

🔄 When should you replace the pod?

As the coil is built in, the entire pod must be replaced when it reaches the end of its service life.

The main signs of wear are:

• Less intense flavors
• Less dense vapor
• Burnt taste
• Irregular vapor production
• Unusual leaks

The 3-pack format means you always have replacement pods close at hand.

🎯 Which version should you choose?

Choose the 0.6/0.8Ω if you want more vapor and a vape ranging from open MTL to light RDL.

Choose the 0.7/1.0Ω for a tighter draw, moderate consumption and longer battery life.

Both versions let you enjoy ECO and PWR modes while maintaining the same ease of use.

⭐ VAPORESSO VIBE Dual Mesh – two vaping styles with a single pod

With their 4.5 ml capacity, built-in Dual Mesh coil and two available configurations, VAPORESSO VIBE DUAL MESH PODS offer excellent versatility.

The 0.6/0.8Ω version delivers a more powerful vape of up to 28W, while the 0.7/1.0Ω version offers a smoother, more economical MTL experience.

Sold in a 3-pack, these pods are a practical solution for making the most of the VIBE range while easily switching from ECO to PWR mode.