Vaporesso VIBE SE 2: what’s new compared with the VIBE SE?

The Vaporesso VIBE SE 2 does not overturn the VIBE SE's philosophy: it remains a simple, automatic, accessible MTL pod. However, Vaporesso improves several very practical aspects: the battery increases from 1100 to 1400 mAh, maximum power rises with the Dual Mesh pods, and the filling system evolves to a more convenient Top Fill design.

For users of the first VIBE SE, the question is therefore simple: do these improvements justify upgrading to the second generation? Here are the truly important differences between the VIBE SE and the VIBE SE 2.

VIBE SE 2 vs VIBE SE: the main differences

The Vaporesso VIBE SE 2 28W 1400mAh Kit is now available from VAPEVO.

A 1400 mAh battery: the most obvious improvement

The first VIBE SE featured a 1100 mAh battery. The VIBE SE 2 increases this to 1400 mAh, adding 300 mAh without completely changing the range's compact spirit.

This increase is particularly relevant on an MTL or slightly open MTL pod, as the power levels remain relatively low. Actual battery life obviously depends on the pod used, ECO or PWR mode, puff duration, and frequency of use.

Vaporesso also highlights a battery life of up to 30 hours in ECO mode under its own laboratory conditions. This figure should be considered manufacturer data, not a guaranteed duration for all users.

Up to 28W: the VIBE SE 2 delivers more power

The second major improvement concerns the two vaping modes.

With the Dual Mesh 0.6/0.8 Ω pod:

• VIBE SE: approximately 14W in ECO and 24W in PWR;
• VIBE SE 2: approximately 15W in ECO and up to 28W in PWR.

With the 0.7/1.0 Ω pod:

• VIBE SE: approximately 12W in ECO and 20W in PWR;
• VIBE SE 2: approximately 13W in ECO and 22W in PWR.

The difference is not spectacular on paper, but it creates more contrast between ECO and PWR modes. ECO mode favors a softer, more economical vape, while PWR uses a lower-resistance coil for a fuller vapor production.

Dual Mesh: one pod, two experiences

The VIBE range is based on Dual Mesh cartridges. The principle is to offer two vaping experiences from the same cartridge depending on the selected mode.

On the VIBE SE 2, the slider lets you choose the mode and also controls the airflow. This approach avoids complex menus and screens: the vaper can quickly switch from a gentler vape to a more dynamic one.

To better understand the connection between coil, power, and inhalation style, the guide MTL, RDL or DL: what's the difference? makes it easier to place the VIBE SE 2. It remains primarily MTL-oriented, with the possibility of a more open draw depending on the pod and mode selected.

Top Fill really does simplify refilling

Vaporesso presents the top-fill system as an evolution of the VIBE SE 2. It is probably one of the most useful improvements in everyday use.

Top Fill provides easier access to the filling port and reduces the necessary handling. For a pod intended for everyday use, this type of change can be more appreciated than a simple increase in power.

As with any new cartridge, it is important to let the cotton wick become properly saturated before first use to prevent dry heating.

The VIBE SE 2 remains deliberately simple

Despite these improvements, Vaporesso has not turned the VIBE SE 2 into an advanced pod. It retains:

• automatic activation when inhaling;
• an RGB LED to indicate, among other things, the battery level;
• operation without a complex screen;
• ECO and PWR modes accessible via a slider;
• a 5V/1A USB-C recharge.

So it is more of an evolution than a break with the past. The VIBE SE 2 mainly aims to address the practical limitations of the first generation without sacrificing its simplicity.

Which e-liquid should you use with the VIBE SE 2?

The VIBE SE 2 is primarily intended for MTL vaping and uses relatively high-resistance coils in ECO mode, but can become more dynamic in PWR mode. A balanced e-liquid is generally the most versatile choice for this type of pod.

Our guide which e-liquid to choose for a pod explains how to adapt the PG/VG ratio, nicotine type, and liquid to the coil being used.

Nicotine salts can be used with certain MTL setups by choosing a strength consistent with your habits and taking the power used into account. Nicotine-containing products are for adults only, and nicotine is addictive.

Should you switch from the VIBE SE to the VIBE SE 2?

For a user whose VIBE SE works perfectly and who is satisfied with its battery life, switching is not essential. The two devices are based on a very similar philosophy.

On the other hand, the VIBE SE 2 becomes much more appealing if you want:

• a larger 1400 mAh battery;
• slightly more power in PWR mode;
• a more convenient Top Fill;
• stay within the VIBE ecosystem without switching to a more complex pod.

VIBE SE 2 compared with other Vaporesso pods in 2026

Vaporesso now offers several very different product families. The VIBE SE 2 prioritizes simplicity and MTL. The XROS 6 and XROS 6 Mini target users who appreciate the XROS ecosystem and a wider choice of pods, while the LUXE Q3 also focuses on a compact, MTL-oriented approach with its own pod platform.

The VIBE SE 2 stands out above all for its extremely simple ECO/PWR control and its Dual Mesh system, which lets you quickly change the performance of the same pod.

Our conclusion: a logical evolution of the VIBE SE

The Vaporesso VIBE SE 2 improves on the strengths without complicating the formula. The 1400 mAh battery is the most significant change, followed by Top Fill and the increase in power to 28W with the 0.6/0.8 Ω pod.

VIBE SE owners therefore do not get a completely different device, but a longer-lasting and more practical version. For a new user looking for an MTL pod without complicated settings, this second generation is logically more refined.

Find the Vaporesso VIBE SE 2 at VAPEVO.

FAQ

What is the main difference between the VIBE SE and VIBE SE 2?

The battery increases from 1100 to 1400 mAh. The VIBE SE 2 also offers more power and features Top Fill.

What power output does the VIBE SE 2 reach?

With the Dual Mesh 0.6/0.8 Ω pod, PWR mode can reach 28W. ECO mode operates at a lower power to provide a smoother vape and extend battery life.

Is the VIBE SE 2 more MTL or DL?

It is primarily geared toward MTL, with a draw that can become more open depending on the pod, mode, and airflow setting. It is not intended for the very airy DL experience of large sub-ohm kits.